60W High Power Mini Metal Lathe Mill Woodworking 7 In 1 DIY Model Making Craft
1. Motor case and headstock are jointed. Maximum motor power is 144W by using more powerful motor.The parts in the kit can be assembled into 7 kinds of machines with different function: jigsaw, woodturning lathe, metal lathe, milling machine, drilling machine, sanding machine, Hand-held Machine,only one kind of machine can be assembled each time.
2.Main parts: headstock, central block, jigsaw base, jigsaw casing, motor blade, gear, woodturning chisel base, cross slider, big slider, drilling lever, drilling table, jigsaw table, connection piece, tailstock, sanding paper panel, machine vice(all of the parts above are made of metal), drive belt cover, grinding wheel, wheel guard.
1.Motor speed :12,000rpm/min(optional choice 20,000rpm/min)
Switching power input:AC110V-240V
3.Jigsaw working table size:90mm*90mm
4.Maximum working material diameter of metal lathe and woodturning lathe:50mm
5.Working material length of metal lathe and woodturning lathe:135mm
6.Center height of metal lathe:50mm
7. Slider travel: axis X 145, axis Y 32, axis Z 32.
9. Drilling working table size: 123*100mm
10. Maximum workpiece size clamped by vice:50mm
11. Maximum workpiece diameter clamped by three-jaw chuck:50mm
12. All of the machines are safe touch except milling machines. It requests to be used under parents or teachers instruction when the milling machine is being used by the kids.
Working material thickness of jigsaw: hardwood 4mm, plywood 7mm, soft wood 18mm, aluminum 0.5mm, acrylic 2mm. It is a good tool for families and schools to do model airplane and other wood model crafts.
Questions and Answers
Questions and Answers
You are not logged in
Install the software(only recognize ENGLISH) to your laptop or desktop to
engraving your picture.
Support Windows 7,8,10,XP,2000
Max. Engraving Area: 50*40cm
Laser module: 12V high power aser module (with fan)
Laser Power: 2500mW(2.5W)
Can be carved materials: bamboo, wood, paper, plastic, leather, etc.
5.5W can cut 3MM linden wood
Stepper motor: Two Y axis 42 stepper motors
Control board: 2 axis USB standard control panel
Control software:our own software / advanced knife engraving (GRBL)
Frame material: high quality aluminum + quality 8mm acrylic+stainless steel screws
Power supply: 12V (100-240V)
Random: Accessories storage box, wood chips, six angle wrench, goggles
Violet light version with heat cooling fan.
High speed brushless spindle parameters:
Spindle motor: new brushless DC motor (imported NSK Bearings)
Operating voltage: 24VDC need brushless drive, the motor can run
Speed: 65 ~ 10000r / min
Torque: 44.9 (N.cm)
Insulation resistance:> 2 megohms
Insulation Dielectric Strength: 400V
Chuck part length: Arbor part 32mm,
Chuck part diameter: 16mm
Total motor length: 148mm (including clamping parts and motor)
Spindle weight: 1.0KG
Spindle radial runout 0.01-0.02 or so.
Can be used for engraving metal or non-metallic materials.
The spindle features high speed, low noise, low heat, you can work long between.
ER11 chuck can be replaced according to processing requirements, support 1,1.5,2.0,2.5,3.0,3.175,3.5,4.0,4.5,5.0,5.5,6.0,6.5,7.0MM specifications ER11 chuck