4th Axis Hollow Shaft CNC Router Rotational A Axis Φ100MM 4 Jaw Chuck Engraving
Chuck models: K12-100MM 4 Jaw Centring Chuck
Reducing ratio: 6:1
Total height: 115mm
Center height: 65mm
Output shaft diameter: 30mm
Hollow shaft diameter: 21mm
Step angle: 0.3 degree/step
Motor: Nema23 2-phase 57 stepper motor
Synchronous belt model: 5M-350
Dimensions: 210mm * 168mm * 115mm
Made in China
Questions and Answers
Questions and Answers
You are not logged in
CNC F Style A-Axis, 4th-Axis, Router Rotational Rotary Axis 3-Jaw 80mm+Tailstock Sold By bucks-saver
CNC F Style A-Axis, 4th-Axis, Router Rotational Rotary Axis with 3-Jaw 80mm+Tailstock
F Style A-Axis, 4th-Axis, Rotary Axis:
Overall Dimension(mm): 200*200*100.
80mm 3-jaw scroll chuck.
Chuck center height: 49mm.
Ratio: 1:6(1200 P/R) synchronous pulley induction
Brand new NEMA23 stepper motor, 1.8degree, 2.2N.M 3.5A.
Stainless anti-dust cover.
Surface with anti-rusty coating
4-pin air plug: 1=A+, 2=A-, 3=B+, 4=B-
Frame Material :Aluminum Alloy;
Outter Dimension(mm): 150*80*80mm;
Center Height: 49mm;
Anti-rusty coating cover;
3.0 inch rotary handwheel;
Tailstock stroke limit & position self-lock.
Product weight: 1.25kg
Very Important Note: If there were any problem during your using of this machine, please contact us first, don’t try to open or take apart the machine by yourself
High speed brushless spindle parameters:
Spindle motor: new brushless DC motor (imported NSK Bearings)
Operating voltage: 24VDC need brushless drive, the motor can run
Speed: 65 ~ 10000r / min
Torque: 44.9 (N.cm)
Insulation resistance:> 2 megohms
Insulation Dielectric Strength: 400V
Chuck part length: Arbor part 32mm,
Chuck part diameter: 16mm
Total motor length: 148mm (including clamping parts and motor)
Spindle weight: 1.0KG
Spindle radial runout 0.01-0.02 or so.
Can be used for engraving metal or non-metallic materials.
The spindle features high speed, low noise, low heat, you can work long between.
ER11 chuck can be replaced according to processing requirements, support 1,1.5,2.0,2.5,3.0,3.175,3.5,4.0,4.5,5.0,5.5,6.0,6.5,7.0MM specifications ER11 chuck
Install the software(only recognize ENGLISH) to your laptop or desktop to
engraving your picture.
Support Windows 7,8,10,XP,2000
Max. Engraving Area: 50*40cm
Laser module: 12V high power aser module (with fan)
Laser Power: 2500mW(2.5W)
Can be carved materials: bamboo, wood, paper, plastic, leather, etc.
5.5W can cut 3MM linden wood
Stepper motor: Two Y axis 42 stepper motors
Control board: 2 axis USB standard control panel
Control software:our own software / advanced knife engraving (GRBL)
Frame material: high quality aluminum + quality 8mm acrylic+stainless steel screws
Power supply: 12V (100-240V)
Random: Accessories storage box, wood chips, six angle wrench, goggles
Violet light version with heat cooling fan.